John Deere X107

500-cc (30.5 cu in.) engine

Engine fuel filter and oil filter

A 500-cc (30.5-cu in.) engine is used in the X107. It produces 11.1 kW of power at 3200 rpm.

A 500-cc (30.5-cu in.) engine is used in the X117R. It produces 10.84 kW of power at 3100 rpm.

The engine has the size and features to handle tough mulching, mowing, and bagging conditions:

• Electronic ignition for fast starts
• Spring-return feature to ensure the operator will not mistakenly leave the throttle lever in the choke position
• Cast-iron cylinder liner for longer engine life
• Overhead valves for excellent power and fuel economy

No-tools oil-drain valve

No-tools oil-drain valve is easy to access when changing the engine oil.

FUEL TANK

Convenient fuel-filler opening

• Capacity is 9 L
• Large-diameter fuel-filler opening is conveniently located under the tractor seat.
  • Filling the tank without spilling is easy.
  • A tethered fuel tank cap is more convenient.
  • The sealed fuel cap helps keep vapours inside the tank.

Solid one-piece frame

Solid one-piece frame

The solid, one-piece frame is constructed of 12-gauge, 2.66-mm (0.105-in.) steel:

• Full-length, robotically welded frame design has high-strength steel rails for added strength and long life.
• One-piece steel fender deck is bolted to the frame.

CAST-IRON FRONT AXLE WILL NOT BEND

Front axle and wheel spindle

The front axle is constructed of solid cast iron that will not bend:

• Automotive-like steering system with sector and pinion steering gears provide a very strong, low-effort, and tight-turning system.
• Three grease fittings, on both steering spindles and the centre pivot, allow for regular lubrication to help maintain easy steering and minimize wear.
• Large, 19-mm (0.75-in.) diameter wheel spindles provide excellent durability.

HOOD WILL NOT DENT OR RUST AND INCLUDES QUALITY HEADLIGHTS FOR GOOD VISIBILITY

One-piece hood opens for service access

Quality headlights for good visibility

The hood is made of moulded-in colour material:

• Reduces sound
• Will not rust or dent
• Openings in the hood let in plenty of cooling air while keeping the sound level low
• Two headlights provide good lighting for night-time operation

Hydro/automatic two-pedal speed/direction controls

A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy. Side-by-side foot pedals control the speed and direction of travel:

• Automotive-type accelerator control ensures easy operation.
• The operator can change direction without lifting foot off the platform.
• Large pedal surface gives superior operator comfort.

Hydrostatic transmission

Hydrostatic transmission

Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:

• Tuff Torq TLT200 - X107 and X127
• Tuff Torq K46 - X167, X117R, X147R, and X167R

Comfortable operator station

Comfortable operator station

The operator station is designed for operator comfort and easy operation:

• Controls are positioned where they are easy to reach and use to control the tractor.
• The steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
• The seat is positioned to provide the most comfortable operator position.

Steering wheel and dash

Wide footrest with debris channels

Controls are easy to see and use:

• Large, three-spoke steering wheel provides greater operator comfort and control.
• Controls are colour coded for easy recognition.
• An hour meter makes it easy to tell when oil changes and other maintenance should be performed.

Wide footrest areas with non-slip, anti-vibration floor mats are provided for operator comfort and safety.

• Optimum operator comfort
• Debris removing channels help keep the footrest area clean and dry

Comfortable seat

Easily adjusted seat

The operator seat can be easily adjusted forward or backward while on the seat, with seat travel of 140 mm (5.5 in.) and 10 different positions.

Seat raised for fuel-fill access and storage

Seat springs

The seat has a 28 cm (11-in) back height and can be tilted forward for protection from the weather and to provide easy access to the fuel tank. Seat springs give a smoother ride.

Beverage holder and storage compartment

A beverage holder and storage compartment are located on the right fender for operator convenience.

NOTE: A storage compartment cover is standard on X127, X167, and X167R Tractors and is optional on the X107 and X147R. The optional cover can be ordered from Parts.

INSTRUMENTS AND CONTROLS

Steering wheel and controls

The contoured dash is functional and attractive:

• Ignition switch is on the dash for starting ease.
• Hour meter on dash is easy to see.
• Controls are color-coded and labelled for easy identification by the operator.
• Controls are logically placed and easy to reach.
• The functional design of the controls provides good appearance and a comfortable feel.

MOWER DECK HEIGHT ADJUSTMENT

Mower deck height adjustment lever

A spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:

• Increments of 0.64-cm (0.25-in.) allow the operator to fine-tune the cut height.
• Cut height is adjustable from 2.5 cm (1 in.) to 10.2 cm (4 in.).

TRANSMISSION CONTROL

Side-by-side foot pedals

Two side-by-side pedals control the speed and direction of travel:

• Automotive-type accelerator control ensures easy operation.
• The operator can change direction without lifting foot off the platform.
• Large pedal surface gives superior operator comfort.

MANUAL POWER TAKE-OFF (PTO) CONTROL LEVER

Deck-engagement lever

The mower deck is engaged with the yellow lever on the dashboard. Its placement on the right side leaves the left entry side of the tractor unobstructed.

PARKING BRAKE CONTROL

Parking brake control

Brake pedal

The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.

FUEL TANK HAS GAUGE TO SHOW FUEL LEVEL FROM THE OPERATOR'S SEAT

Fuel gauge

The fuel tank gauge allows the operator to tell how much fuel is in the tank without leaving the seat:

• Easy-to-check fuel level
• Convenient location